4G Camera

POSITION: Home > Products> 4G Camera

IP4-425

Description:

  • * 4G 1.0/1.3/2.0MP WIFI IP.
  • * 4pcs Array IR Leds 80M.
  • * 3MP CS 6mm Fix Lens.
  • * Weatherproof 4G WIFI IP Bullet Camera.
  • * Support WIFI:802.11 B/G/N.
  • * Support TF Card (Max 128G).
  • * Support 2G/3G/4G All Kinds of Networks.
  • * IP66 Weatherproof Standard.
  • * Solar WIFI IP Camera.
  • * APP:Camhi,CMS:Camhi.
  • * #90 Size Metal Housing.

Feature:

* Weatherproof 4G WIFI IP Bullet Camera.

* Support 2G/3G/4G All Kinds of Networks.

* 1.0/1.3/2.0MP Chipset 720P/960P/1080P.

* With 4pcs Array IR Leds 80M.  

* Built-in 3MP CS 6mm Fixed Lens. 

* Support WIFI:802.11 B/G/N.

* Support TF Card (Max 128G).

* Support Onvif to NVR,CMS.

* IP66 Weatherproof Standard.

* APP:Camhi,CMS:Camhi.

* #90 Size Metal Housing.


Installation Note:

(1) Do not use this product falls on the ground or the strong tapping;

(2) Unless the instructions, otherwise do not disassemble the machine itself;

(3) Before use, please determine whether the power supply for the specified voltage;

(4) Aim to avoid strong light (such as sunlight, lighting, etc), otherwise easy to cause a bright or light phenomenon (this is not a fault), will also affect the Chipset life;

(5) Avoid in damp, dusty, hot, cold, strong electromagnetic radiation, etc;

(6) If found abnormal situation, please unplug the power and contact the local distributor.

(7) Lightning protection earth wire should be grounded to the nearest.


Installation and Operating Instructions:

(1) Make sure the power supply voltage is correct: DC12V,Solar Power, inside outside is negative.

(2) Using Cat5/Cat6 cable to transmit video signal to the monitoring equipment.

(3) Choose the right place to fix the camera.

(4) Connect the power and adjust the camera Angle come into view in the position of the target.