Feature:

* 1.3MP & 2.0MP.

* 4/6mm Fix Lens. 

* 4pcs Array IR Led.

* 2.8-12mm Optional.

* Car Licence Camera.

* With Metal IR CUT Flitter.

* OSD Cable on Menu to adjust.

* UTC By Coaxial Cable up to 500 Meters. 

* Support AHD/TVI/CVI/XVI/CVBS.

* Support DWDR 3DNR.

1.With strong light suppression, super-wide dynamic function, 3D noise reduction, clear capture of vehicle grades;

2.LED/LCD Display: speed display, light suppression of the current value display, press the button to set the fill light brightness;

3.Can simultaneously monitor one to two lanes, the maximum speed support 180KM /Hour

4.Parking mode, highway mode, a key configuration function, simplify the user installation and debugging work;

Installation Note:

(1) Do not use this product falls on the ground or the strong tapping;

(2) Unless the instructions, otherwise do not disassemble the machine itself;

(3) Before use, please determine whether the power supply for the specified voltage;

(4) Aim to avoid strong light (such as sunlight, lighting, etc), otherwise easy to cause a bright or light phenomenon (this is not a fault), will also affect the Chipset life;

(5) Avoid in damp, dusty, hot, cold, strong electromagnetic radiation, etc;

(6) If found abnormal situation, please unplug the power and contact the local distributor.

(7) Lightning protection earth wire should be grounded to the nearest.

Installation and Operating Instructions:

(1) Make sure the power supply voltage is correct: DC12V, inside outside is negative.

(2) Using 75 Ω coaxial cable to transmit video signal to the monitoring equipment.

(3) Choose the right place to fix the camera.

(4) Connect the power and adjust the camera Angle come into view in the position of the target.